D Type Rubber Fender
D Type Rubber Fenders are used for tugs, barges, work boats, and pilot boats as
side belting and protective fenders against heavy rubbing, brushing and pushing forces. It can be pre-curved, chamfered and drilled to aid installation at a relatively low cost and can also be cut to the length required.
Characteristics
- Higher volumes of energy absorption and reaction force than those of cylindrical fender
- Compact size and expedient installation
- The side for attachment is flat so that it can be secured more firmly than cylindrical fender.
- Provide an excellent barrier against damage from all sizes and shapes of vessels
Installation
Specification
Type | H (mm) |
B (mm) |
L (mm) |
Holes | Q (mm) |
C (mm) |
h (mm) |
D200x200x900 | 200 | 200 | 900 | 2 | 600 | 150 | 40 |
D200x200x1000 | 200 | 200 | 1000 | 2 | 600 | 200 | 40 |
D200x200x1500 | 200 | 200 | 1500 | 3 | 600 | 150 | 40 |
D200x200x2000 | 200 | 200 | 2000 | 4 | 500 | 250 | 40 |
D300x300x900 | 300 | 300 | 900 | 2 | 600 | 150 | 40 |
D300x300x1000 | 300 | 300 | 1000 | 3 | 350 | 150 | 40 |
D300x300x1500 | 300 | 300 | 1500 | 3 | 600 | 150 | 40 |
D300x300x1500 | 300 | 300 | 1500 | 4 | 400 | 150 | 40 |
D300x300x2000 | 300 | 300 | 2000 | 4 | 500 | 250 | 40 |
D400x400x1000 | 400 | 400 | 1000 | 3 | 350 | 150 | 55 |
D400x400x1500 | 400 | 400 | 1500 | 3 | 600 | 150 | 55 |
D400x400x1500 | 400 | 400 | 1500 | 4 | 400 | 150 | 55 |
D500x500x1000 | 500 | 500 | 1000 | 3 | 350 | 150 | 90 |
D500x500x1500 | 500 | 500 | 1500 | 3 | 600 | 150 | 90 |
D500x500x1500 | 500 | 500 | 1500 | 4 | 400 | 150 | 90 |
D500x500x1000 | 500 | 500 | 1000 | 3×2 | 350 | 150 | 100 |
D500x500x1500 | 500 | 500 | 1500 | 4×2 | 400 | 150 | 100 |
D500x500x2000 | 500 | 500 | 2000 | 5×2 | 400 | 200 | 100 |