CFH-D Type Marine Electric Fire Damper

1. Features:

  • Control voltage DC24V/AC220V/AC110V is supplied, the fire damper should normal open and close on outage.
  • Central control room can cut off the electric source to close the fire damper in emergency, and reconnect the power to open the fire damper again.
  • If the temperature of air within damper duct exceeds 70±3°C or outside air temperature around duct near 95°C, the fusible link of fire damper will be broken and cut off the control electrical power to close the fire damper.
  • On/Off signal output when the fire damper is open/close.
  • Each fire damper is supplied with one electrical control box to control on/off operation of the fire damper locally or remotely.

2. Outline drawing:

CFH-D type marine electrical fire damperCFH-D type marine electric fire damper

3. Supply scope:

  • Electric control box: 1 set
  • Junction box:   1 set
  • User should clearly specify in order list if have special requirement.

4. Type & Parameter:

A) Rectangular single blade electrical fire damper

Type a x b L Flange size
CFH-D axb 100×100 ~ 500×700 ≥250 According to GB1561-79

B) Circular single blade electrical fire damper

Type a x b L Flange size
CFH-D ø D 100×500 ≥250 According to GB1561-79

C) Rectangular multi-blades electrical fire damper

Type a x b L Flange size
CFHD-D axb 300×400~1600×2000 ≥250 According to GB1561-79

D) Circular multi-blades electrical fire damper

Type a x b L Flange size
CFHD-D ø D 300×1800 ≥300 According to GB1561-79

Note: Flange size of all fire dampers could be fabricated according to user’s requirements.

 

 

Inquiry Now